0201YK4R7JBSTR [KYOCERA AVX]
Thin-Film Technology; 薄膜技术![0201YK4R7JBSTR](http://pdffile.icpdf.com/pdf2/p00201/img/icpdf/0201YK_1137180_icpdf.jpg)
型号: | 0201YK4R7JBSTR |
厂家: | ![]() |
描述: | Thin-Film Technology |
文件: | 总20页 (文件大小:458K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1
Thin-Film Technology
®
®
Accu-F / Accu-P
Thin-Film RF/Microwave Capacitors
5
®
®
Accu-F / Accu-P
Thin-Film Technology
This accuracy sets apart these Thin-Film capacitors from
ceramic capacitors so that the term Accu has been
employed as the designation for this series of devices, an
abbreviation for “accurate.”
THE IDEAL CAPACITOR
The non-ideal characteristics of a real capacitor can be
ignored at low frequencies. Physical size imparts inductance
to the capacitor and dielectric and metal electrodes result in
resistive losses, but these often are of negligible effect on the
circuit. At the very high frequencies of radio communication
(>100MHz) and satellite systems (>1GHz), these effects
become important. Recognizing that a real capacitor will
exhibit inductive and resistive impedances in addition to
capacitance, the ideal capacitor for these high frequencies is
an ultra low loss component which can be fully characterized
in all parameters with total repeatability from unit to unit.
THIN-FILM TECHNOLOGY
Thin-film technology is commonly used in producing semi-
conductor devices. In the last two decades, this technology
has developed tremendously, both in performance and in
process control. Today’s techniques enable line definitions of
below 1µm, and the controlling of thickness of layers at 100Å
1
-2
(10 µm). Applying this technology to the manufacture of
Until recently, most high frequency/microwave capacitors
were based on fired-ceramic (porcelain) technology. Layers
of ceramic dielectric material and metal alloy electrode paste
are interleaved and then sintered in a high temperature oven.
This technology exhibits component variability in dielectric
quality (losses, dielectric constant and insulation resistance),
variability in electrode conductivity and variability in physical
size (affecting inductance). An alternate thin-film technology
has been developed which virtually eliminates these vari-
ances. It is this technology which has been fully incorporated
capacitors has enabled the development of components
where both electrical and physical properties can be tightly
controlled.
The thin-film production facilities at AVX consist of:
• Class 1000 clean rooms, with working areas under
laminar-flow hoods of class 100, (below 100 particles
per cubic foot larger than 0.5µm).
• High vacuum metal deposition systems for high-purity
electrode construction.
®
®
into Accu-F and Accu-P to provide high frequency capaci-
tors exhibiting truly ideal characteristics.
• Photolithography equipment for line definition down to
2.0µm accuracy.
®
®
The main features of Accu-F and Accu-P may be summa-
rized as follows:
• Plasma-enhanced CVD for various dielectric deposi-
tions (CVD=Chemical Vapor Deposition).
• High purity of electrodes for very low and repeatable
ESR.
• High accuracy, microprocessor-controlled dicing saws
for chip separation.
• Highly pure, low-K dielectric for high breakdown field,
high insulation resistance and low losses to frequencies
above 40GHz.
• High speed, high accuracy sorting to ensure strict
tolerance adherence.
• Very tight dimensional control for uniform inductance,
unit to unit.
• Very tight capacitance tolerances for high frequency
signal applications.
TERMINATION
ALUMINA
SEAL
ELECTRODE
ELECTRODE
DIELECTRIC
ALUMINA
ACCU-P® CAPACITOR
6
®
®
Accu-F / Accu-P
Thin-Film Chip Capacitors
ACCU-F® TECHNOLOGY
ACCU-P® TECHNOLOGY
As in the Accu-F series the use of very low-loss dielectric
®
The use of very low-loss dielectric materials, silicon dioxide
and silicon oxynitride, in conjunction with highly conductive
electrode metals results in low ESR and high Q. These
high-frequency characteristics change at a slower rate with
increasing frequency than for ceramic microwave capacitors.
materials (silicon dioxide and silicon oxynitride) in conjunction
with highly conductive electrode metals results in low ESR and
high Q. At high frequency these characteristics change at
a slower rate with increasing frequency than conventional
ceramic microwave capacitors. Using thin-film technology, the
above-mentioned frequency characteristics are obtained with-
out significant compromise of properties required for surface
mounting. The use of high thermal conductivity materials
results in excellent RF power handling capabilities.
Because of the thin-film technology, the above-mentioned
frequency characteristics are obtained without significant
compromise of properties required for surface mounting.
1
®
The main Accu-F properties are:
• Internationally agreed sizes with excellent dimensional
control.
• Small size chip capacitors (0603) are available.
• Tight capacitance tolerances.
• Low ESR at VHF, UHF and microwave frequencies.
• High stability with respect to time, temperature, frequency
and voltage variation.
®
The main Accu-P properties are:
• Enhanced RF power handling capability.
• Improved mechanical characteristics.
• Internationally agreed sizes with excellent dimensional control.
• Ultra Small size chip capacitors (0201) are available.
• Tight capacitance tolerances.
• Low ESR at UHF, VHF, and microwave frequencies.
• High-stability with respect to time, temperature, frequency
and voltage variation.
• Nickel/solder-coated terminations to provide excellent
solderability and leach resistance.
ACCU-F® FEATURES
Accu-F meets the fast-growing demand for low-loss
• High temperature nickel/solder-coated terminations as stan-
dard to provide excellent solderability and leach resistance.
®
(high-Q) capacitors for use in surface mount technology espe-
cially for the mobile communications market, such as cellular
radio of 450 and 900 MHz, UHF walkie-talkies, UHF cordless
telephones to 2.3 GHz, low noise blocks at 11-12.5 GHz and
for other VHF, UHF and microwave applications.
ACCU-P® FEATURES
• Minimal batch to batch variability of parameters at high fre-
quency.
®
®
• The Accu-P has the same unique features as the Accu-F
®
Accu-F is currently unique in its ability to offer very
capacitor such as low ESR, high Q, availability of very low
capacitance values and very tight capacitance tolerances.
low capacitance values (0.1pF) and very tight capacitance
®
tolerances ( 0.05pF). Typically Accu-F will be used in small
®
• The RF power handling capability of the Accu-P allows for
its usage in both small signal and RF power applications.
signal applications in VCO’s, matching networks, filters, etc.
Inspection test and quality control procedures in accordance
with ISO 9001, CECC, IECQ and USA MIL Standards yield
products of the highest quality.
• Inspection, test and quality control procedures in accor-
dance with ISO 9001, CECC, IECQ and USA MIL Standards
guarantee product of the highest quality.
®
• Hand soldering Accu-P : Due to their construction
APPLICATIONS
utilizing relatively high thermal conductivity materials,
Accu-P’s have become the preferred device in R & D labs
and production environments where hand soldering is used.
Accu-P’s are available in all sizes and are electrically identi-
cal to their Accu-F counterparts.
Cellular Communications
Radar Systems
Video Switching
Test & Measurements
Filters
VCO’s
Matching Networks
CT2/PCN (Cordless
Telephone/Personal Comm.
Networks)
Satellite TV
Cable TV
GPS (Global Positioning Systems)
Vehicle Location Systems
Vehicle Alarm Systems
Paging
APPLICATIONS
Cellular Communications
CT2/PCN (Cordless
Telephone/Personal Comm.
Networks)
Satellite TV
Cable TV
GPS (Global Positioning Systems)
Vehicle Location Systems
Vehicle Alarm Systems
Paging
Radar Systems
Video Switching
Test & Measurements
Filters
APPROVALS
ISO 9001
Military Communications
VCO's
Matching Networks
RF Amplifiers
APPROVALS
ISO 9001
Military Communications
7
®
®
Accu-F */ Accu-P
Thin-Film Chip Capacitors for
RF Signal and Power Applications
B1
T
B2
ACCU-P® (Signal and Power Type Capacitors)
L
0201
0402*
0603*
0805*
1210
3.02 0.1
1
ACCU-F® *(Signal Type Capacitors)
0.60 0.05
1.00 0.1
1.60 0.1
2.01 0.1
L
W
T
(0.023 0.0024 (0.039 0.00ꢀ4 (0.063 0.00ꢀ4 (0.079 0.00ꢀ4 (0.119 0.00ꢀ4
0.325 0.050 0.55 0.07 0.81 0.1 1.27 0.1 2.5 0.1
(0.0128 0.0024 (0.022 0.0034 (0.032 0.00ꢀ4 (0.050 0.00ꢀ4 (0.100 0.00ꢀ4
0.225 0.050 0.ꢀ0 0.1 0.63 0.1 0.93 0.2 0.93 0.2
0603
1.60 0.1
(0.063 0.00ꢀ4
0805
2.01 0.1
(0.079 0.00ꢀ4
L
W
T
0.81 0.1
(0.032 0.00ꢀ4
1.27 0.1
(0.050 0.00ꢀ4
(0.009 0.0024 (0.016 0.00ꢀ4 (0.025 0.00ꢀ4 (0.036 0.0084 (0.036 0.0084
+0.1
0.10 0.10
0.00
0.35 0.15
(0.01ꢀ 0.0064 (0.012 0.00ꢀ4 (0.017 0.00ꢀ4
0.35 0.15 0.30 0.1 0.ꢀ3 0.1
0.30 0.1
0.ꢀ3 0.1
0.63 0.1
(0.025 0.00ꢀ4
0.63 0.1
(0.025 0.00ꢀ4
-0.0
B1
B2
+0.00ꢀ
-0.000
(0.00ꢀ 0.00ꢀ4
(0.000
4
0.15 0.05
0.20 0.1
0.30 0.1
(0.012 0.00ꢀ4
0.30 0.1
(0.012 0.00ꢀ4
B
(0.006 0.0024 (0.008 0.00ꢀ4 (0.01ꢀ 0.0064 (0.012 0.00ꢀ4 (0.017 0.00ꢀ4
Not recommended for new designs.
Accu-P’s are recommended.
DIMENSIONS:
millimeters (inches)
Mount Black Side Up
DIMENSIONS: millimeters (inches)
*
*
HOW TO ORDER
0402
3
J
4R7
A
B
S
TR
Size
0201*
0402*
0603
0805
Voltage Temperature Capacitance
1 = 100V Coefficient (1)
Tolerance
for
Termination
Code
Packaging
Code
TR = Tape & Reel
Specification
Code
Capacitance
J = 0 30ppm/ꢀC expressed in pF.
®
5 = 50V
3 = 25V
Y = 16V
Z = 10V
C≤2.0pF*
W = Nickel/Solder Coated
A = Accu-F
®
(-55ꢀC to
+125ꢀC)
K = 0 60ppm/ꢀC
(-55ꢀC to
(2 significant
digits + number Q = 0.03pF
of zeros)
for values
<10pF,
P = 0.02pF
Accu-F Sn63, Pb37
technology
®
®
Accu-P 0402 Sn90, Pb10
B = Accu-P
1210*
* Accu-P ONLY
A = 0.05pF
B = 0.1pF
C = 0.25pF
technology
T = Nickel/High Temperature
Solder Coated
®
+125ꢀC)
Accu-P 0805**, 1210**
letter R denotes
decimal point.
Example:
68pF = 680
8.2pF = 8R2
Sn96, Ag4
for
C≤3.0pF
Q = 0.03pF
A = 0.05pF
B = 0.1pF
C = 0.25pF
Nickel/Solder Coated
®
Accu-P 0603
Sn63, Pb37
**S = Nickel/Lead Free
Solder Coated
®
(1) TC’s shown are per EIA/IEC Specifications.
Accu-P 0201, 0402, 0603
for
C≤5.6pF
A = 0.05pF
B = 0.1pF
C = 0.25pF
Sn100
**RoHS Compliant
for
5.6pF<C<10pF
B = 0.1pF
RoHS COMPLIANT
C = 0.25pF
D = 0.5pF
Engineering Kits Available
see pages 90-91
for
C≥10pF
F = 1ꢁ
G = 2ꢁ
J = 5ꢁ
Pb: Free
Please select correct
termination style
* Tolerances as tight as 0.01pF are available. Please consult the factory.
ELECTRICAL SPECIFICATIONS
Operating and Storage Temperature Range
Temperature Coefficients(1)
Capacitance Measurement
Insulation Resistance (IR)
Proof Voltage
-55ꢀC to +125ꢀC
0
30ppm/ꢀC dielectric code “J” / 0 60ppm/ꢀC dielectric code “K”
1 MHz, 1 Vrms
≥1011 Ohms (≥10 Ohms for 0201 and 0402 size)
2.5 UR for 5 secs.
Zero
10
Aging Characteristic
Dielectric Absorption
0.01ꢁ
(1) TC’s shown are per EIA/IEC Specifications.
8
®
Accu-F *
Signal Type Capacitors
Accu-F® Capacitance Ranges (pF)
TEMP. COEFFICIENT CODE
“J” = 0 30ppm/ꢀC
TEMP. COEFFICIENT CODE
“K” = 0 60ppm/ꢀC
(-55ꢀC to +125ꢀC)(2)
(-55ꢀC to +125ꢀ)(2)
1
Size
Size Code
Size
Size Code
0603
50
0805
50
0603
50
0805
50
Voltage
100
25
100
25
Voltage
100
25
100
25
Cap in
pF(1)
Cap
Cap in
Cap
(
code
pF(1)
code
0.1
0.2
0.3
0.ꢀ
0.5
0.6
0.7
0.8
0.9
—
—
—
—
—
—
—
—
—
0R1
0R2
0R3
0Rꢀ
0R5
0R6
0R7
0R8
0R9
0.1
0.2
0.3
0.ꢀ
0.5
0.6
0.7
0.8
0.9
—
—
—
—
—
—
—
—
—
0R1
0R2
0R3
0Rꢀ
0R5
0R6
0R7
0R8
0R9
1.0
1.2
1.5
—
—
—
1R0
1R2
1R5
1.0
1.2
1.5
—
—
—
1R0
1R2
1R5
1.8
2.2
2.7
—
—
—
1R8
2R2
2R7
1.8
2.2
2.7
—
—
—
1R8
2R2
2R7
3.3
3.9
ꢀ.7
—
—
—
3R3
3R9
ꢀR7
3.3
3.9
ꢀ.7
—
—
—
3R3
3R9
ꢀR7
5.6
6.8
8.2
—
—
—
5R6
6R8
8R2
5.6
6.8
8.2
—
—
—
5R6
6R8
8R2
10
12
15
—
—
—
100
120
150
10
12
15
—
—
—
100
120
150
18
22
27
—
—
—
180
220
270
18
22
27
—
—
—
180
220
270
33
39
ꢀ7
—
—
—
330
390
ꢀ70
33
39
ꢀ7
—
—
—
330
390
ꢀ70
56
68
82
—
—
—
560
680
820
56
68
82
—
—
—
560
680
820
100
120
150
—
—
—
101
121
151
100
120
150
—
—
—
101
121
151
(14
(14
For capacitance values higher than listed in table,
please consult factory.
For capacitance values higher than listed in table,
please consult factory.
(24
TC shown is per EIA/IEC Specifications.
(24 TC shown is per EIA/IEC Specifications.
Intermediate values are available within the indicated range.
Not recommended for new designs.
Accu-P’s are recommended.
*
9
®
Accu-P
Signal and Power Type Capacitors
Accu-P® Capacitance Ranges (pF)
TEMP. COEFFICIENT CODE
TEMP. COEFFICIENT CODE
“K” = 0 60ppm/ꢀC (-55ꢀC to +125ꢀC)
Size
(2)
(2)
“J” = 0 30ppm/ꢀC (-55ꢀC to +125ꢀC)
Size
Size Code
Voltage
0201
0402
0603
0805
1210
Size Code
Voltage
805
1210
100 50 25 16 10 100 50 25 16 10 100 50 25 100 50 25 100 50
100 50 25 100 50(3)
Cap in
Cap
Cap in
Cap
pF(1)
code
pF(1)
code
1
0.1
0.2
0.3
0.ꢀ
0.5
0.6
0.7
0.8
0.9
—
—
—
—
—
—
—
—
—
0R1
0R2
0R3
0Rꢀ
0R5
0R6
0R7
0R8
0R9
0.1
0.2
0.3
0.ꢀ
0.5
0.6
0.7
0.8
0.9
—
—
—
—
—
—
—
—
—
0R1
0R2
0R3
0Rꢀ
0R5
0R6
0R7
0R8
0R9
1.0
1.1
1.2
1.3
1.ꢀ
1.5
1.6
1.7
1.8
1.9
—
—
—
—
—
—
—
—
—
—
1R0
1R1
1R2
1R3
1Rꢀ
1R5
1R6
1R7
1R8
1R9
1.0
1.1
1.2
1.3
1.ꢀ
1.5
1.6
1.7
1.8
1.9
—
—
—
—
—
—
—
—
—
—
1R0
1R1
1R2
1R3
1Rꢀ
1R5
1R6
1R7
1R8
1R9
2.0
2.1
2.2
2.3
2.ꢀ
2.5
2.6
2.7
2.8
2.9
—
—
—
—
—
—
—
—
—
—
2R0
2R1
2R2
2R3
2Rꢀ
2R5
2R6
2R7
2R8
2R9
2.0
2.1
2.2
2.3
2.ꢀ
2.5
2.6
2.7
2.8
2.9
—
—
—
—
—
—
—
—
—
—
2R0
2R1
2R2
2R3
2Rꢀ
2R5
2R6
2R7
2R8
2R9
3.0
3.1
3.2
3.3
3.ꢀ
3.5
3.6
3.7
3.8
3.9
—
—
—
—
—
—
—
—
—
—
3R0
3R1
3R2
3R3
3Rꢀ
3R5
3R6
3R7
3R8
3R9
3.0
3.1
3.2
3.3
3.ꢀ
3.5
3.6
3.7
3.8
3.9
—
—
—
—
—
—
—
—
—
—
3R0
3R1
3R2
3R3
3Rꢀ
3R5
3R6
3R7
3R8
3R9
ꢀ.0
ꢀ.1
ꢀ.2
ꢀ.3
ꢀ.ꢀ
ꢀ.5
ꢀ.6
ꢀ.7
—
—
—
—
—
—
—
—
ꢀR0
ꢀR1
ꢀR2
ꢀR3
ꢀRꢀ
ꢀR5
ꢀR6
ꢀR7
ꢀ.0
ꢀ.1
ꢀ.2
ꢀ.3
ꢀ.ꢀ
ꢀ.5
ꢀ.6
ꢀ.7
—
—
—
—
—
—
—
—
ꢀR0
ꢀR1
ꢀR2
ꢀR3
ꢀRꢀ
ꢀR5
ꢀR6
ꢀR7
5.1
5.6
6.2
—
—
—
5R1
5R6
6R2
5.1
5.6
6.2
—
—
—
5R1
5R6
6R2
6.8
7.5
8.2
—
—
—
6R8
7R5
8R2
6.8
7.5
8.2
—
—
—
6R8
7R5
8R2
9.1
10.0
11.0
—
—
—
9R1
100
110
9.1
10.0
11.0
—
—
—
9R1
100
110
12.0
13.0
1ꢀ.0
—
—
—
120
130
1ꢀ0
12.0
13.0
1ꢀ.0
—
—
—
120
130
1ꢀ0
15.0
16.0
17.0
—
—
—
150
160
170
15.0
16.0
17.0
—
—
—
150
160
170
18.0
19.0
20.0
—
—
—
180
190
200
18.0
19.0
20.0
—
—
—
180
190
200
21.0
22.0
2ꢀ.0
—
—
—
210
220
2ꢀ0
21.0
22.0
2ꢀ.0
—
—
—
210
220
2ꢀ0
27.0
30.0
33.0
—
—
—
270
300
330
27.0
30.0
33.0
—
—
—
270
300
330
39.0
ꢀ7.0
56.0
68.0
—
—
—
—
390
ꢀ70
560
680
39.0
ꢀ7.0
56.0
68.0
—
—
—
—
390
ꢀ70
560
680
(14 For capacitance values higher than listed in table, please consult factory.
(14 For capacitance values higher than listed in
table, please consult factory.
(24 TC shown is per EIA/IEC Specifications.
These values are produced with “K” temperature coefficient code only.
(24 TC shown is per EIA/IEC Specifications.
(34 For 50 volt range, please consult factory.
Intermediate values are available within the indicated range.
10
®
Accu-P
0201 Typical Electrical Tables
Self
250MHz
500MHz
750MHz
1000MHz
1250MHz
Capacitance Resonance
@ 1 MHz
(pF)
Frequency
(GHz)
Typical
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
0.8
1.2
1.8
2.2
3.3
3.9
4.7
5.6
6.8
9.1
7.6
6.3
5.7
4.6
4.3
3.9
3.6
3.3
0.84
1.21
1.84
2.23
3.29
3.91
4.71
5.62
6.77
2154
1375
1298
1355
1295
1902
1677
1391
1135
360
405
271
214
156
93
0.84
1.21
1.85
2.24
3.31
3.93
4.74
5.67
6.83
630
525
520
512
430
460
391
370
314
603
517
341
281
230
181
174
154
149
0.85
1.22
1.86
2.25
3.33
3.97
4.80
5.74
6.91
424
341
337
335
285
298
252
257
217
594
527
347
284
230
185
178
148
142
0.85
1.23
1.87
2.27
3.36
4.02
4.87
5.83
7.03
327
267
270
264
220
227
181
195
164
577
503
326
270
223
181
183
144
139
0.86
1.23
1.88
2.29
3.40
4.08
4.97
5.95
7.18
255
208
201
199
159
163
130
140
118
588
515
347
284
242
198
200
157
151
1
84
84
84
Self
1500MHz
1750MHz
2250MHz
2500MHz
2750MHz
Capacitance Resonance
@ 1 MHz
(pF)
Frequency
(GHz)
Typical
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
M
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
0.8
1.2
1.8
2.2
3.3
3.9
4.7
5.6
6.8
9.1
7.6
6.3
5.7
4.6
4.3
3.9
3.6
3.3
0.86
1.24
1.90
2.32
3.45
4.16
5.08
6.11
7.38
204
155
148
145
119
122
99
611
565
388
320
266
216
213
166
155
0.87
1.26
1.92
2.34
3.50
4.25
5.23
6.31
7.63
168
129
123
123
101
103
83
631
577
395
322
263
214
212
164
158
0.88
1.28
1.96
2.41
3.63
4.46
5.55
6.76
8.22
141
92
96
93
74
75
60
64
54
587
570
395
329
277
224
221
174
166
0.89
1.30
1.99
2.46
3.73
4.63
5.83
7.16
8.74
126
89
83
81
64
64
50
53
44
571
566
396
328
276
223
222
175
169
0.90
1.31
2.02
2.50
3.84
4.79
6.10
7.56
9.29
122
81
74
72
55
56
43
45
37
532
558
397
330
281
225
224
141
173
108
93
91
76
11
®
Accu-P
0402 Typical Electrical Tables
Capacitance
Self
& Tolerance* Resonance Ref
Typ.
Typ.
Q
Typ.
Ref
Typ.
Typ.
Q
Typ. Ref Typ.
Typ.
Q
Typ.
Ref Typ. Typ.
Typ.
Ref
Typ.
Typ.
Q
Typ.
@ 1 MHz
(pF)
Frequency
(GHz)
Typical
Freq C(eff)
(MHz) (pF)
ESR Freq C(eff)
(Ω) (MHz) (pF)
ESR Freq C(eff)
(Ω) (MHz) (pF)
ESR Freq C(eff)
(Ω) (MHz) (pF)
Q
ESR
(Ω)
Freq C(eff)
(MHz) (pF)
ESR
(Ω)
0.1 0.05
0.2 0.05
0.3 0.05
0.4 0.05
0.5 0.05
0.6 0.05
0.7 0.05
0.8 0.05
0.9 0.05
1.00 0.05
1.10 0.05
1.20 0.05
1.30 0.05
1.40 0.05
1.50 0.05
1.60 0.05
1.70 0.05
1.80 0.05
1.90 0.05
2.00 0.05
2.10 0.05
2.20 0.05
2.30 0.05
2.40 0.05
2.50 0.05
2.60 0.05
2.70 0.05
2.80 0.05
2.90 0.05
3.00 0.05
3.10 0.05
3.20 0.05
3.30 0.05
3.40 0.05
3.50 0.05
3.60 0.05
3.70 0.05
3.80 0.05
3.90 0.05
4.00 0.05
4.10 0.05
4.20 0.05
4.30 0.05
4.40 0.05
4.50 0.05
4.60 0.05
4.70 0.05
5.10 0.05
5.60 0.05
6.2 0.1
19.4
16.4
14.6
12.5
11.3
10.4
9.5
9.1
8.8
8
7.8
7.4
7
6.8
6.5
6.5
6.4
6.2
6
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.15 1283
1.22 1219
1.33 1153
1.42 1109
1.54 1061
1.63 1002
1.76
1.81
1.86
1.93
2.06
2.14
2.27
2.36
2.48
2.6
2.71
2.83
2.94
3.11
3.39
3.45
3.61
3.72
3.78
3.82
3.87
3.93
4
4.01
4.07
4.18
4.27
4.34
4.45
4.52
4.62
4.74
5.16
5.75
6.09
6.94
7.51
8.36
9.28
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.13
1.21
1.31
1.4
1.52
1.58
1.69
1.75
1.83
1.91
2.11
2.21
2.26
2.4
2.51
2.62
2.73
2.82
2.9
2.99
3.11
3.22
3.3
3.42
3.53
3.6
3.7
3.81
3.9
4.02
4.11
4.2
4.29
4.43
4.5
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.12 620
1.19 561
1.3
1.35 480
1.49 461
1.6
1.71 429
1.75 422
1.8
1.91 401
2.01 400
2.1
2.27 396
2.3 379
2.41 358
2.52 349
2.65 331
2.86 313
2.91 308
3.15 303
3.41 299
3.48 291
3.68 285
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1
n/a
n/a
247
246
245
244
243
242
242
241
240
239
239
238
237
237
236
235
234
233
233
232
231
230
230
229
228
227
226
226
225
224
224
223
223
222
222
221
221
220
217
214
211
208
205
202
199
196
193
189
186
184
182
179
178
1.16 1635 0.34
1.25 1581 0.32
1.34 1538 0.30
1.42 1502 0.29
1.53 1476 0.28
1.63 1454 0.28
1.71 1448 0.27
1.85 1444 0.27
1.93 1430 0.26
2.01 1421 0.25
2.11 1410 0.24
2.21 1406 0.23
2.28 1406 0.22
2.32 1405 0.20
2.45 1404 0.19
2.49 1404 0.18
494
492
491
490
488
486
485
483
482
481
480
478
476
475
473
472
470
469
468
467
466
465
464
462
461
460
459
458
458
457
457
456
455
454
453
452
451
450
447
443
440
436
433
430
428
0.22 742
0.21 740
0.21 738
0.21 736
0.20 733
0.20 731
0.20 729
0.19 728
0.19 727
0.19 726
0.18 722
0.17 720
0.16 718
0.16 716
0.16 715
0.16 714
0.15 712
0.15 711
0.15 710
0.15 710
0.15 709
0.15 708
0.15 707
0.14 707
0.14 706
0.14 705
0.14 704
0.14 702
0.13 699
0.13 697
0.13 696
0.13 696
0.12 695
0.12 694
0.12 693
0.12 692
0.11 691
0.11 690
0.11 687
0.11 684
0.10 681
0.09 678
0.09 675
0.08 673
0.09 670
870
791
727
701
680
638
622
612
597
583
582
581
581
549
501
486
477
464
458
450
440
429
421
415
407
402
395
389
386
384
381
380
379
373
369
364
359
351
348
342
339
334
320
306
249
0.22
0.22
0.22
0.21
0.21
0.21
0.21
0.20
0.20
0.20
0.19
0.18
0.17
0.17
0.17
0.17
0.17
0.17
0.16
0.16
0.16
0.16
0.16
0.16
0.15
0.15
0.15
0.15
0.15
0.15
0.14
0.14
0.14
0.14
0.14
0.13
0.13
0.13
0.13
0.12
0.11
0.10
0.10
0.09
0.10
0.11
0.11
0.11
0.09
0.12
0.10
0.11
0.11
0.10
0.11
0.11
0.12
991
989
986
983
980
978
986
985
983
972
969
966
964
962
960
959
958
956
954
953
952
951
950
949
948
947
946
945
944
943
942
941
940
939
939
938
938
937
934
932
928
926
924
922
920
0.23 1240 1.14
0.24 1238 1.21
0.25 1234 1.33
0.24 1230 1.41
0.23 1229 1.53
0.23 1226 1.65
0.23 1224 1.77
0.22 1223 1.86
0.22 1220 1.91
0.21 1219 1.97
0.20 1215 2.11
0.19 1213 2.22
0.18 1212 2.35
0.18 1209
0.19 1208 2.53
0.19 1205 2.7
0.19 1204 2.85
0.19 1203
0.18 1202 3.12
0.18 1201 3.24
0.18 1201 3.33
0.18 1199 3.45
0.17 1198 3.58
0.17 1197 3.61
0.17 1196 3.78
0.16 1195 3.91
474
425
372
350
333
316
309
305
299
294
293
291
289
262
253
240
231
224
220
218
212
207
203
198
195
191
186
181
177
172
170
169
167
168
162
161
161
159
131
129
128
127
120
0.25
0.25
0.25
0.25
0.25
0.25
0.24
0.23
0.23
0.22
0.21
0.20
0.19
0.20
0.20
0.20
0.20
0.20
0.20
0.19
0.19
0.19
0.19
0.19
0.19
0.18
0.18
0.18
0.18
0.18
0.18
0.17
0.17
0.17
0.16
0.16
0.16
0.16
0.16
0.16
0.15
0.14
0.13
0.13
0.13
0.12
0.12
0.12
0.12
0.15
0.13
0.14
0.14
0.14
0.14
0.14
0.14
503
438
986
970
931
897
896
893
893
870
845
821
799
778
769
751
746
733
725
711
705
693
688
667
658
649
650
655
658
657
660
665
670
673
589
576
585
591
567
542
458
413
5.7
5.4
5.1
5
398
2.4
4.9
4.7
4.6
4.5
4.5
4.4
4.4
4.4
4.3
4.3
4.3
4.2
4.2
4.1
4
3.9
3.9
3.8
3.8
3.7
3.7
3.6
3.6
3.5
3.4
3.3
3
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.2
2.1
2.1
2
1.9
1.8
1.8
1.8
1.75
2.6
1402 0.16
2.84 1399 0.15
2.85 1395 0.15
2.87 1395 0.15
2.88 1392 0.14
3
2.9
1392 0.14
2.91 1391 0.14
2.92 1391 0.14
2.93 1390 0.14
2.95 1389 0.13
2.97 1382 0.13
2.99 1381 0.13
3.8
282
3.79 276
3.85 273
3.89 270
3.95 262
4.02 256
4.11 251
4.18 250
4.23 248
4.37 247
4.58 246
4.62 246
0.16 1194
0.16 1193
4
4.1
4
1380 0.13
0.16 1192 4.23
0.16 1191 4.37
0.16 1190 4.46
0.15 1190 4.52
0.15 1199 4.66
0.15 1195 4.75
0.14 1192 4.82
0.14 1190 4.96
0.14 1188 5.07
0.14 1186 5.18
0.14 1184 5.82
0.14 1182 6.62
0.12 1180 7.34
0.11 1177 8.22
0.10 1176 9.01
4.01 1379 0.13
4.09 1372 0.12
4.18 1370 0.12
4.27 1356 0.12
4.36 1355 0.12
4.44 1351 0.11
4.53 1350 0.11
4.62 1347 0.11
4.75 1343 0.11
5.19 1310 0.11
5.74 1297 0.11
6.31 1244 0.10
6.92 1202 0.09
7.57 1155 0.08
8.35 1116 0.08
9.23 1059 0.09
4.6
4.7
245
4.72
4.74
5.23
5.81
6.33
7.04
7.85
8.48
9.87
4.79 244
4.86 244
5.53 230
6.01 201
6.68 202
7.39 203
8.17 191
8.93 186
10.2 152
6.8 0.1
7.5 0.1
8.2 0.1
9.1 0.1
0.10 1174 10.04 118
0.11 1172 11.98
0.13 1171 13.75
0.12 1170 15.3
0.13 1168 17.63
0.11 1164 23.9
0.14 1167 23.1
0.16 1166 23.6
0.13 1161 34.7
0.12 1163 34.9
0.11 1164 35.2
0.11 1163 37.5
0.12 1162 39.1
0.13 1161 100.5
88
70
61
52
47
40
44
28
28
29
24
19
15
10.0 1ꢁ
11.0 1ꢁ
12.0 1ꢁ
13.0 1ꢁ
14.0 1ꢁ
15.0 1ꢁ
16.0 1ꢁ
17.0 1ꢁ
18.0 1ꢁ
19.0 1ꢁ
20.0 1ꢁ
22.0 1ꢁ
10.14 936
11.19 912
12.16 889
13.3
14.26 802
15.34 791
0.09
0.08
0.08
0.07
0.08
0.07
0.07
0.07
0.07
0.08
0.08
424 10.24 385
421 11.17 363
418
416 13.32 363
414 14.44 298
413 15.46 283
410
410
409 18.42 258
407 19.4 241
405 20.43 195
404 23.105 174
0.10 668 10.55 202
0.09 666 11.81 185
0.09 664 12.77 173
0.08 661
0.09 660 15.03 149
0.08 660 16.16 138
0.08 657
0.08 657
0.07 657 19.51 130
0.07 655 20.51 115
0.06 655
0.54 654
919 11.49 118
917 12.87 103
915 14.16 95
12.3
348
984
14.1
183
912
15.8 101
913 16.72 76.7
912 18.51 82
16.3
17.6
780
765
16.4
17.7
270
263
17.6
18.2
129
130
909
909
910
908
908
20.2
21.3
22.7 75.5
24.5
26.5
68
70
176.5 18.13 754
175
173
19.2
20.32 520
680
62
57
22.1
25
112
85.5
170.04 22.42 497.5 0.09
907 30.95 44
* Other tolerances are available, see page 8
12
®
Accu-P
0402 Typical Electrical Tables
Capacitance
Self
& Tolerance* Resonance Ref
Typ.
Typ.
Q
Typ.
Ref
Typ. Typ.
Typ.
Ref Typ.
Typ.
Q
Typ.
Ref
Typ. Typ. Typ.
Ref
Typ.
Typ.
Q
Typ.
@ 1 MHz
(pF)
Frequency
(GHz)
Typical
Freq C(eff)
(MHz) (pF)
ESR Freq C(eff)
(Ω) (MHz) (pF)
Q
ESR Freq C(eff)
(Ω) (MHz) (pF)
ESR Freq C(eff)
(Ω) (MHz) (pF)
Q
ESR
Freq C(eff)
(MHz) (pF)
ESR
(Ω)
(Ω)
0.1 0.05
0.2 0.05
0.3 0.05
0.4 0.05
0.5 0.05
0.6 0.05
0.7 0.05
0.8 0.05
0.9 0.05
1.00 0.05
1.10 0.05
1.20 0.05
1.30 0.05
1.40 0.05
1.50 0.05
1.60 0.05
1.70 0.05
1.80 0.05
1.90 0.05
2.00 0.05
2.10 0.05
2.20 0.05
2.30 0.05
2.40 0.05
2.50 0.05
2.60 0.05
2.70 0.05
2.80 0.05
2.90 0.05
3.00 0.05
3.10 0.05
3.20 0.05
3.30 0.05
3.40 0.05
3.50 0.05
3.60 0.05
3.70 0.05
3.80 0.05
3.90 0.05
4.00 0.05
4.10 0.05
4.20 0.05
4.30 0.05
4.40 0.05
4.50 0.05
4.60 0.05
4.70 0.05
5.10 0.05
5.60 0.05
6.2 0.1
19.4
16.4
14.6
12.5
11.3
10.4
9.5
9.1
8.8
8
7.8
7.4
7
6.8
6.5
6.5
6.4
6.2
6
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
380
342
307
289
265
252
246
241
240
239
233
230
228
214
196
182
173
164
159
156
150
148
145
143
138
133
130
126
125
121
121
121
120
120
119
119
118
118
105
90
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
314
275
251
240
221
203
201
199
198
197
190
185
183
168
151
144
132
122
120
117
114
109
105
101
101
95
94
92
90
89
88
87
87
85
85
81
80
80
75
61
60
58
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
265
232
208
196
179
169
168
167
166
165
160
155
149
132
120
112
97
94
88
84
81
79
77
76
75
73
71
69
67
66
66
65
65
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
200
177
149
137
125
115
119
120
122
123
118
115
108
99
91
81
72
66
65
63
61
59
58
55
52
51
51
49
48
47
48
49
49
50
52
52
54
54
39
28
33
36
33
31
15
8
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1
n/a
n/a
1489
1485
1483
1479
1477
1474
1472
1470
1469
1468
1466
1463
1461
1460
1459
1458
1455
1453
1451
1450
1449
1448
1447
1446
1446
1445
1445
1444
1443
1442
1441
1440
1440
1439
1439
1438
1438
1437
1435
1434
1432
1430
1.18
1.29
1.37
1.45
1.6
1.72
1.81
1.92
1.98
2.06
2.12
2.31
2.47
2.51
2.6
2.77
2.85
3.18
3.25
3.33
3.49
3.61
3.7
3.79
4.01
4.11
4.2
4.28
4.44
4.72
4.8
4.92
5.01
5.17
5.28
5.41
5.49
5.6
0.25 1739 1.25
0.25 1735 1.33
0.25 1732 1.45
0.25 1729 1.58
0.25 1726 1.71
0.25 1724 1.82
0.24 1722 1.91
0.23 1719 1.99
0.22 1718 2.06
0.22 1717 2.19
0.21 1716 2.22
0.20 1714 2.43
0.20 1711 2.65
0.20 1709 2.81
0.25 1988 1.32
0.25 1986 1.41
0.25 1982 1.54
0.25 1980 1.66
0.25 1977 1.78
0.25 1974 1.94
0.24 1971 2.01
0.24 2240 1.38 229
0.24 2238 1.49 201
0.24 2234 1.59 173
0.24 2230 1.73 166
0.24 2229 1.88 154
0.24 2227 2.01 143
0.23 2493 1.41
0.24 2490 1.55
0.25 2488 1.62
0.25 2485 1.76
0.25 2483 1.89
0.25 2481 2.03
0.23
0.25
0.27
0.27
0.26
0.27
0.25
0.24
0.22
0.21
0.21
0.20
0.20
0.22
0.23
0.23
0.24
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.24
0.24
0.24
0.24
0.24
0.24
0.23
0.23
0.21
0.20
0.20
0.19
0.19
0.19
0.21
0.23
0.19
0.14
0.14
0.14
0.16
0.18
0.18
0.19
0.23 2226
2.1
142
0.24 2479
2.1
0.23 1970
2.1
0.22 2225 2.23 141
0.21 2223 2.34 141
0.21 2222 2.41 140
0.20 2220 2.62 138
0.20 2219 2.76 132
0.20 2217 2.91 126
0.19 2216 3.15 121
0.19 2215 3.42 109
0.19 2214 3.58
0.19 2212 3.73
0.20 2211 3.89
0.20 2210 3.97
0.20 2210 4.12
0.20 2209 4.26
0.20 2209 4.45
0.19 2208 4.62
0.20 2207 4.81
0.20 2206 4.93
0.19 2206 5.21
0.23 2478 2.23
0.22 2477 2.35
0.21 2476 2.42
0.21 2475 2.65
0.22 1969 2.24
0.21 1968 2.33
0.21 1968 2.51
0.21 1966 2.62
0.20 1964 2.83
0.20 1963 2.98
0.20 1962 3.16
0.20 1960 3.32
0.20 1957 3.51
0.20 1956 3.75
0.20 1956 3.93
0.20 1956 4.02
0.20 1955 4.21
5.7
5.4
5.1
5
0.2
2474 2.81
0.19 2473 2.91
0.19 2471 3.16
0.2
4.9
4.7
4.6
4.5
4.5
4.4
4.4
4.4
4.3
4.3
4.3
4.2
4.2
4.1
4
3.9
3.9
3.8
3.8
3.7
3.7
3.6
3.6
3.5
3.4
3.3
3
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.2
2.1
2.1
2
1.9
1.8
1.8
1.8
1.75
0.20 1708
3
2469 3.42
0.20 1706 3.12
0.20 1705 3.25
0.20 1703 3.47
0.20 1702 3.62
0.19 1702 3.77
0.19 1701 3.99
0.19 1700 4.16
0.19 1700 4.31
0.19 1699 4.47
0.19 1698 4.62
0.19 1697 4.78
0.19 1697 4.91
0.19 1696 5.05
0.19 1696 5.11
0.19 1695 5.26
0.18 1694 5.38
92
85
78
75
73
72
70
69
68
66
65
63
62
61
60
60
60
59
58
57
56
55
56
45
0.21 2468 3.66
0.22 2467 3.73
0.24 2466 3.89
0.24 2466 4.03
0.24 2466 4.17
0.24 2465 4.21
0.24 2465 4.33
0.23 2464 4.49
0.23 2464 4.66
0.22 2464 4.92
0.23 2463 5.15
0.22 2463 5.25
0.22 2462 5.41
0.22 2462 5.66
0.22 2461 5.82
0.21 2461 5.86
0.21 2460
0.21 2460 5.95
0.2
0.2
0.19 2458 6.23
0.18 2458 6.29
0.18 2457 6.35
0.20 1952
4.4
0.20 1952 4.62
0.20 1951 4.76
0.20 1950 4.92
0.20 1950 5.18
0.20 1949 5.34
0.20 2205
5.4
0.19 1949
5.5
0.20 2205 5.62
0.20 2204 5.78
0.21 2204 5.94
0.20 2203 6.03
0.19 2203 6.11
0.18 2203 6.24
0.18 2202 6.35
0.19 1948 5.61
0.19 1948 5.77
0.19 1947 5.81
0.19 1947 5.93
0.18 1946 6.05
0.18 1946 6.11
0.18 1945 6.23
0.18 1945 6.45
0.18 1944 6.66
0.18 1944 6.72
0.18 1943 7.97
0.17 1942 10.03
0.15 1941 11.52
0.13 1940 13.36
0.14 1939 15.06
0.13 1938 16.85
0.14 1937 28.35
0.16 1936 40.16
0.15 1935 66.25
0.14 1934 92.97
0.17 1934 125
0.21 1934 180.3
0.17 1933 244.5
0.17 1932
0.18 1693
5.5
5.9
0.18 1692 5.63
0.18 1692 5.78
0.18 1691 5.91
0.18 1691 6.04
0.17 1691 6.11
0.17 1690 6.23
0.17 1689 7.48
0.17 1687 8.75
0.15 1686 10.21
0.13 1684 11.43
0.13 1683 12.25
0.13 1682 14.43
0.13 1681 19.07
0.14 1680 26.51
0.15 1679 32.66
0.15 1678 43.51
0.13 1671 63.2
0.15 1677 122
0.14 1676 154
0.14 1670
64
64
64
63
63
60
51
48
45
40
38
25
11
8
5
3
2459 6.01
2459 6.12
0.18 2202
6.4
0.19 2201 6.52
0.17 2201 6.67
0.17 2200 6.71
0.19 2200 8.11
0.21 2199 10.42 37
0.18 2198 11.88 36
0.14 2196 13.72 37
0.13 2195 15.24 35
0.13 2195 16.65 32
0.15 2194 31.08 15
0.17 2194 45.46
0.17 2192 81.07
0.18 2192 123.19
0.18 2191
0.19 2191
0.16 2191
6.59
7.43
8.27
9.41
0.2
2456
8.1
0.22 2456 10.07
0.18 2455 11.02
0.14 2454 12.85
0.15 2454 13.66
0.14 2453 15.32
0.16 2452 29.91
0.18 2452 39.54
0.2
0.2
0.2
0.18
0.161
0.16
0.16
0.16
0.16
0.16
0.155
91
88
85
79
60
41
36
29
18
17
20
12
11
9
7
5
6.8 0.1
7.5 0.1
8.2 0.1
9.1 0.1
1429 10.05
1428 11.64
1427 13.39
1425
1424 20.09
1423 24.14
1417
1422 39.55
1421 38.93
1416
1415
1411 83.13
56
52
33
21
19
13
5
2
10.0 1ꢁ
11.0 1ꢁ
12.0 1ꢁ
13.0 1ꢁ
14.0 1ꢁ
15.0 1ꢁ
16.0 1ꢁ
17.0 1ꢁ
18.0 1ꢁ
19.0 1ꢁ
20.0 1ꢁ
22.0 1ꢁ
17.6
8
5
3
2451 61.28
2450 82.44
6
4
48.3
1
2
79.3
77.6
0.16 2191
0.16 2191
0.16 2182
0.16 2181
0.16 2180
0.16 2178
0.14 1670
0.15 1675
0.15 1673
0.15 1673
0.17 1932
0.17 1932
0.16 1932
0.16 1930
1415
1415
1415.3 78.8
79.6
78.5
4
0.15 1670.5
0.15 1927.5
* Other tolerances are available, see page 8
13
®
®
Accu-F / Accu-P
0603 Typical Electrical Tables
Capacitance
Self
Ref
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
MHz
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
MHz
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
MHz
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
& Tolerance* Resonance Freq.
@ 1 MHz
(pF)
Frequency MHz
(GHz)
0.1 0.05
0.2 0.05
0.3 0.05
0.4 0.05
0.5 0.05
0.6 0.10
0.7 0.10
0.8 0.10
0.9 0.10
1.0 0.10
1.1 0.10
1.2 0.10
1.3 0.10
1.4 0.10
1.5 0.10
1.6 0.10
1.7 0.10
1.8 0.10
1.9 0.10
2.0 0.10
2.1 0.10
2.2 0.10
2.4 0.25
2.7 0.25
3.0 0.25
3.3 0.25
3.6 0.25
3.9 0.25
4.3 0.25
4.7 0.25
5.1 0.25
5.6 0.25
6.2 0.25
6.8 0.25
7.5 0.50
8.2 0.50
9.1 0.50
10 5ꢁ
18.0
12.7
10.4
9.0
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
491
490
487
486
485
484
483
482
479
478
477
475
474
471
468
465
459
456
455
451
448
445
443
439
435
432
429
425
422
420
418
416
414
412
410
408
404
403
402
401
400
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
738
736
734
732
731
729
727
725
723
721
720
718
717
713
709
706
699
697
695
692
689
686
684
680
677
675
672
670
667
665
663
661
660
659
657
656
654
653
652
651
650
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
987
985
981
974
977
976
973
971
969
967
966
964
962
958
954
951
945
942
940
937
935
931
929
927
925
925
921
919
917
916
914
913
912
911
910
908
906
905
905
904
904
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1
8.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
7.4
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
6.8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
6.4
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
6.0
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5.7
5.4
5.2
5.0
4.8
4.7
4.5
4.4
4.2
4.1
4.0
3.9
3.8
3.7
3.5
3.3
3.1
3.0
2.9
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.6
1.5
1.5
1.4
1.3
1.2
1.2
1.1
1.0
1.0
245
244
243
242
241
241
240
240
239
239
238
237
236
234
232
230
226
224
223
220
218
216
214
211
208
205
202
200
195
191
189
187
185
182
179
176
170
168
165
163
160
1.15/0.90
1.25/1.00
1.35/1.10
1.45/1.15
1.55/1.25
1.65/1.35
1.75/1.45
1.85/1.55
2.10/1.70
2.15/1.78
2.11/1.80
2.25/1.95
2.40/2.05
2.70/2.15
3.00/2.45
3.40/2.75
3.60/3.05
3.90/3.30
4.20/3.65
4.60/4.00
5.00/4.45
5.40/4.85
5.90/5.35
6.50/5.95
7.20/6.55
8.10/7.00
8.80/7.70
9.80/8.60
10.70/9.50
11.60/10.90
12.90/11.40
13.10/12.90
14.90/13.25
15.90/14.25
17.00/15.15
19.50/17.00
24.00/20.90
26.00/22.80
29.00/25.60
32.00/28.50
37.65/31.35
.280
.270
.260
.260
.250
.250
.240
.230
.220
.210
.205
.200
.190
.175
.160
.150
.130
.128
.125
.122
.120
.115
.110
.105
.100
.095
.090
.090
.085
.085
.085
.080
.080
.080
.070
.070
.066
.066
.065
.064
.064
1.10/0.90
1.25/1.00
1.35/1.05
1.45/1.15
1.55/1.25
1.65/1.35
1.75/1.45
1.85/1.60
2.10/1.70
2.15/1.80
2.11/1.80
2.25/1.98
2.45/2.05
2.75/2.15
3.10/2.45
3.40/2.75
3.70/3.05
4.25/3.35
4.35/3.70
4.80/4.05
5.20/4.45
5.70/4.89
6.10/5.35
6.90/5.95
7.25/6.55
8.10/7.00
8.80/7.70
10.95/8.65
11.60/9.50
12.20/10.60
13.40/11.50
14.00/13.00
16.90/14.00
17.50/15.30
18.00/15.90
20.20/17.10
25.00/20.90
30.00/23.00
36.00/27.00
40.00/30.00
45.00/33.00
.220
.210
.200
.200
.190
.180
.180
.170
.160
.160
.155
.150
.145
.140
.125
.120
.120
.119
.115
.117
.110
.105
.100
.099
.099
.099
.098
.098
.097
.095
.095
.095
.090
.090
.085
.085
.080
.080
.080
.080
.080
1.10/0.90
1.11/1.00
1.40/1.05
1.45/1.15
1.45/1.25
1.65/1.35
1.75/1.45
1.85/1.60
2.10/1.70
2.15/1.80
2.11/1.80
2.35/1.98
2.42/2.05
2.80/2.15
3.10/2.45
3.40/2.75
3.70/3.05
3.90/3.35
4.90/3.75
5.10/4.05
5.30/4.50
6.00/4.90
6.15/5.40
7.10/6.00
7.50/6.60
8.20/7.00
9.00/7.70
12.00/9.00
12.50/9.60
13.20/10.50
14.60/11.90
16.00/13.50
19.00/15.00
21.00/16.50
22.00/17.00
23.70/19.00
28.00/21.00
N/A
.220
.210
.210
.200
.200
.190
.190
.180
.170
.167
.165
.162
.160
.150
.145
.140
.130
.125
.120
.115
.115
.115
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.100
.100
.100
.10
1.15/0.90
1.25/1.00
1.35/1.05
1.45/1.15
1.55/1.25
1.70/1.35
1.80/1.50
1.90/1.60
2.15/1.70
2.20/1.80
2.25/1.90
2.35/2.00
2.45/2.10
2.80/2.15
3.15/2.48
3.60/2.80
3.80/3.10
4.10/3.40
5.15/3.75
5.30/4.05
5.50/4.55
6.20/5.00
6.50/5.50
8.00/6.10
9.00/6.65
9.50/7.05
10.00/7.80
13.00/9.10
16.00/9.90
17.00/10.00
18.00/12.00
21.00/14.00
26.00/15.00
29.00/17.00
30.00/18.00
33.00/21.00
39.00/21.50
N/A
.300
.290
.280
.270
.260
.250
.250
.250
.250
.240
.230
.220
.210
.200
.190
.170
.165
.160
.150
.150
.145
.140
.135
.130
.130
.125
.125
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
11 5ꢁ
12 5ꢁ
13 5ꢁ
14 5ꢁ
15 5ꢁ
16 5ꢁ
18 5ꢁ
22 5ꢁ
24 5ꢁ
.10
27 5ꢁ
N/A
.10
N/A
30 5ꢁ
N/A
.10
N/A
33 5ꢁ
N/A
.10
N/A
* Other tolerances are available, see page 8
1ꢀ
®
®
Accu-F / Accu-P
0805 Typical Electrical Tables
Capacitance
Ref
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
MHz
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
MHz
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
MHz
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Self
& Tolerance* Resonance Freq.
@ 1 MHz
(pF)
Frequency MHz
(GHz)
0.1 0.05
0.2 0.05
0.3 0.05
0.4 0.05
0.5 0.05
0.6 0.10
0.7 0.10
0.8 0.10
0.9 0.10
1.0 0.10
1.1 0.10
1.2 0.10
1.3 0.10
1.4 0.10
1.5 0.10
1.6 0.10
1.7 0.10
1.8 0.10
1.9 0.10
2.0 0.10
2.1 0.10
2.2 0.10
2.4 0.25
2.7 0.25
3.0 0.25
3.3 0.25
3.6 0.25
3.9 0.25
4.3 0.25
4.7 0.25
5.1 0.25
5.6 0.25
6.2 0.25
6.8 0.25
7.5 0.05
8.2 0.05
9.1 0.05
10 5ꢁ
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
500
496
492
488
487
486
484
483
482
481
479
477
475
473
470
465
463
462
459
456
451
447
444
442
435
434
432
429
423
420
418
416
414
414
411
408
406
405
403
401
400
399
397
396
395
394
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
750
754
739
734
733
731
729
728
726
724
722
720
716
714
711
707
704
704
701
697
691
688
684
683
677
675
673
670
668
665
663
662
661
660
659
657
656
655
654
652
651
650
649
648
647
646
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
999
993
987
980
979
977
975
974
972
970
967
964
962
960
957
952
948
947
944
940
936
934
930
927
925
924
922
920
918
916
915
914
913
912
911
910
908
907
907
906
905
904
903
902
901
900
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5.6
5.4
5.1
4.9
4.8
4.6
4.5
4.3
4.2
4.1
4.0
3.9
3.8
3.6
3.4
3.3
3.1
3.0
2.9
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.8
1.6
1.6
1.5
1.5
1.4
1.3
1.3
1.2
1.2
1.1
1.0
1.0
0.9
0.9
0.9
0.8
250
248
245
243
242
242
241
240
239
239
238
237
236
235
233
231
229
228
227
223
220
218
215
212
208
206
203
199
196
193
190
187
184
182
179
176
173
171
168
165
163
159
157
155
153
152
1.20/0.90
1.30/1.00
1.40/1.10
1.50/1.20
1.60/1.30
1.70/1.40
1.80/1.50
1.90/1.60
2.00/1.70
2.10/1.80
2.20/1.90
2.30/2.00
2.40/2.10
2.85/2.15
3.19/2.45
3.51/2.75
3.83/3.05
4.16/3.35
4.48/3.65
4.91/4.05
5.35/4.45
5.78/4.85
6.00/5.35
7.00/5.95
7.20/6.55
8.64/7.00
9.40/7.70
10.37/8.60
11.00/9.50
12.50/10.45
13.61/11.40
14.75/12.35
15.88/13.30
17.02/14.25
18.16/15.20
20.42/17.10
22.70/19.00
24.95/20.90
27.20/22.80
30.78/25.69
34.23/28.50
37.85/31.35
41.19/34.20
44.79/37.05
49.99/40.85
55.19/44.65
.320
.290
.270
.260
.240
.230
.220
.210
.200
.200
.190
.190
.180
.170
.160
.150
.140
.140
.130
.130
.120
.120
.100
.100
.100
.100
.090
.080
.080
.080
.070
.070
.070
.070
.070
.070
.060
.060
.060
.060
.050
.050
.050
.050
.050
.050
1.20/0.90
1.30/1.00
1.40/1.10
1.50/1.20
1.60/1.20
1.70/1.40
1.85/1.50
1.95/1.60
2.05/1.70
2.15/1.80
2.30/1.90
2.40/2.00
2.60/2.10
3.13/2.29
3.47/2.55
3.76/2.86
4.04/3.10
4.35/3.42
4.67/3.72
5.11/4.13
5.52/4.53
5.94/4.94
6.82/5.40
7.52/6.00
8.21/6.88
9.02/7.10
9.83/7.90
10.88/8.76
11.92/9.76
13.23/10.50
14.50/11.90
15.80/13.00
17.22/14.00
18.56/15.19
19.90/16.28
22.69/18.57
25.38/20.78
28.08/21.00
31.31/25.61
36.10/32.20
40.58/33.20
46.65/35.00
52.22/38.00
59.08/47.08
70.50/53.04
81.99/59.00
.300
.270
.250
.230
.220
.210
.210
.200
.190
.190
.180
.170
.170
.170
.150
.140
.140
.130
.120
.120
.110
.110
.100
.100
.100
.100
.080
.080
.080
.080
.080
.080
.080
.080
.080
.070
.070
.070
.070
.070
.070
.070
.070
.070
.060
.060
1.20/0.90
1.30/1.00
1.40/1.10
1.50/1.10
1.60/1.20
1.70/1.40
2.00/1.50
2.05/1.60
2.10/1.70
2.25/1.80
2.40/1.90
2.60/2.00
2.80/2.14
3.17/2.30
3.52/2.60
3.84/2.93
4.15/3.19
4.50/3.53
4.85/3.86
5.32/4.25
5.79/4.60
6.25/5.20
7.27/5.60
8.08/6.10
8.90/6.96
9.85/7.50
10.80/8.25
12.02/9.10
13.24/10.00
15.07/11.00
16.90/12.82
18.87/14.00
20.84/16.00
22.62/19.13
27.00/20.89
33.00/22.10
38.00/23.15
42.00/24.00
N/A
.270
.250
.240
.230
.220
.220
.220
.210
.210
.200
.200
.190
.190
.190
.170
.160
.160
.150
.150
.150
.140
.140
.120
.120
.120
.120
.110
.110
.110
.110
.110
.110
.110
.110
.100
.100
.100
.100
.090
.090
.090
.090
.090
.090
.090
.090
1.20/0.90
1.30/1.00
1.40/1.10
1.50/1.20
1.60/1.30
1.70/1.40
2.00/1.50
2.20/1.60
2.30/1.70
2.40/1.80
2.60/1.95
2.80/2.06
3.06/2.17
3.31/2.31
3.67/2.60
4.00/3.00
4.38/3.30
4.80/3.60
5.23/3.90
5.79/4.50
6.36/4.80
7.16/5.74
8.25/5.90
9.35/6.80
10.46/7.32
11.75/8.42
13.04/9.53
14.70/10.70
15.37/11.80
16.00/12.20
N/A
.300
.290
.280
.270
.260
.260
.250
.240
.230
.230
.220
.210
.210
.210
.200
.190
.190
.190
.180
.180
.170
.160
.150
.150
.150
.150
.150
.150
.140
.140
.140
.140
.140
.130
.130
.130
.130
.130
.130
.130
.130
.120
.120
.120
.120
.110
11 5ꢁ
12 5ꢁ
13 5ꢁ
N/A
14 5ꢁ
N/A
15 5ꢁ
N/A
16 5ꢁ
N/A
18 5ꢁ
N/A
20 5ꢁ
N/A
22 5ꢁ
N/A
24 5ꢁ
N/A
27 5ꢁ
N/A
N/A
30 5ꢁ
N/A
N/A
33 5ꢁ
N/A
N/A
36 5ꢁ
N/A
N/A
39 5ꢁ
N/A
N/A
43 5ꢁ
N/A
N/A
47 5ꢁ
N/A
N/A
* Other tolerances are available, see page 8
15
®
Accu-P
1210 Typical Electrical Tables
Capacitance
Self
Ref
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
(MHz)
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
(MHz)
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
Ref
Freq.
(MHz)
Effective
Capacitance
Max/Min
(pF)
Max
ESR
(Ω)
& Tolerance* Resonance Freq.
@ 1 MHz
(pF)
Frequency (MHz)
(GHz)
1.0 0.25
1.2 0.25
1.5 0.25
1.8 0.25
2.2 0.25
2.7 0.25
3.3 0.25
3.6 0.25
3.9 0.25
4.3 0.25
4.7 0.25
5.1 0.25
5.6 0.25
6.2 0.25
6.8 0.25
7.5 0.25
8.2 0.25
9.1 0.25
10 5ꢁ
4.98
4.55
4.07
9.71
9.96
2.70
2.60
2.50
2.40
2.30
2.20
2.10
2.00
1.90
1.80
1.70
1.70
1.60
1.50
1.50
1.40
1.30
1.30
1.20
1.20
1.10
1.10
1.00
0.98
0.96
0.92
0.91
0.88
0.85
0.84
0.82
0.80
0.77
0.73
0.70
247
245
242
240
237
233
229
228
227
223
220
218
215
212
208
206
203
199
196
193
190
185
183
182
180
176
173
171
168
166
164
163
162
161
159
158
157
155
153
152
1.23/0.75
1.32/0.95
.350
.310
.250
.200
.170
.140
.140
.130
.130
.120
.120
.110
.110
.100
.100
.100
.100
.090
.090
.090
.080
.080
.080
.080
.080
.070
.070
.070
.070
.070
.070
.070
.070
.070
.060
.060
.060
.060
.060
.060
495
491
486
482
476
466
463
462
458
456
451
447
441
442
435
434
432
429
423
420
418
416
415
414
411
408
406
405
403
402
401
401
400
399
399
398
397
396
396
395
1.34/0.86
1.45/1.00
.260
.240
.230
.200
.170
.140
.130
.130
.120
.110
.110
.110
.100
.100
.100
.100
.090
.090
.090
.090
.080
.080
.080
.080
.080
.080
.080
.080
.080
.080
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
745
739
731
731
727
708
704
704
701
697
691
683
681
679
677
675
673
670
668
665
663
662
661
660
659
657
656
655
654
653
652
651
651
650
650
649
649
649
648
648
1.46/0.94
1.64/1.1
1.82/1.95
2.4/1.6
.280
.260
.250
.200
.180
.150
.140
.140
.140
.130
.130
.130
.120
.110
.110
.100
.100
.090
.090
.090
.090
.090
.090
.090
.090
.080
.080
.080
.080
.080
.080
.080
.080
.080
.080
.080
.070
.070
.070
.070
995
987
978
978
969
952
948
947
944
940
936
933
928
927
925
924
922
920
918
916
915
914
913
912
911
909
908
908
907
907
906
906
905
905
905
904
904
904
904
903
1.6/0.99
2.00/1.2
2.1/1.4
2.54/1.7
3.02/2.2
3.89/2.70
4.49/3.30
4.78/3.45
5.18/3.90
5.72/4.30
6.56/4.70
7.20/5.40
8.15/6.00
9.18/7.00
10.20/7.42
11.36/8.00
13.00/9.10
15.11/10.25
17.22/11.06
N/A
.350
.320
.270
.210
.200
.170
.160
.160
.150
.140
.140
.140
.140
.130
.130
.130
.130
.130
.130
.130
.120
.120
.120
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
1.6/1.23
1.75/1.3
2.1/1.55
2.21/1.56
2.48/1.95
2.68/2.00
2.85/2.1
3.73/2.63
4.33/3.23
4.50/3.32
4.85/3.75
5.32/4.29
5.94/4.60
6.36/5.10
7.17/5.67
7.99/6.10
8.81/6.93
9.58/7.60
10.68/8.31
12.10/9.66
13.51/10.05
15.07/11.33
16.90/12.82
18.80/13.60
20.85/16.00
22.62/17.00
25.12/18.00
30.00/24.00
35.00/26.00
42.00/27.00
N/A
1
3.42/2.45
3.49/2.55
4.02/3.05
4.09/3.15
4.18/3.35
4.32/3.43
4.53/3.65
4.66/3.73
5.01/4.05
5.11/4.14
5.48/4.45
5.62/4.50
5.88/4.85
6.04/4.90
6.49/5.35
6.72/5.56
7.19/5.95
7.26/6.07
7.38/6.55
8.16/6.42
8.60/7.90
8.90/7.25
9.36/7.70
9.76/7.96
10.34/8.60
11.33/9.50
12.50/10.45
13.61/11.40
14.75/12.35
15.89/13.30
17.02/14.25
18.16/15.20
20.42/17.10
22.70/19.00
24.95/20.90
27.20/22.60
26.39/23.75
30.78/25.65
31.93/26.50
34.23/28.50
36.51/30.40
37.65/31.35
38.83/32.30
41.20/34.20
44.79/37.05
49.99/40.85
55.69/44.65
10.87/8.88
11.97/9.79
13.23/10.83
14.59/11.90
15.64/13.00
17.22/14.00
18.56/15.19
19.90/16.28
22.69/18.57
25.36/20.78
28.06/22.96
31.31/25.60
32.91/26.00
36.10/28.00
37.60/30.76
40.50/33.20
44.63/34.50
46.65/35.00
48.51/37.00
52.22/41.00
59.00/43.00
70.00/46.00
81.00/53.00
11 5ꢁ
12 5ꢁ
N/A
13 5ꢁ
N/A
14 5ꢁ
N/A
15 5ꢁ
N/A
16 5ꢁ
N/A
18 5ꢁ
N/A
20 5ꢁ
N/A
22 5ꢁ
N/A
24 5ꢁ
N/A
25 5ꢁ
N/A
N/A
27 5ꢁ
N/A
N/A
28 5ꢁ
N/A
N/A
30 5ꢁ
N/A
N/A
32 5ꢁ
N/A
N/A
33 5ꢁ
N/A
N/A
34 5ꢁ
N/A
N/A
36 5ꢁ
N/A
N/A
39 5ꢁ
N/A
N/A
43 5ꢁ
N/A
N/A
47 5ꢁ
N/A
N/A
* Other tolerances are available, see page 8
16
®
®
Accu-F / Accu-P
High Frequency Characteristics
Typical ESR vs. Frequency
®
Accu-P 0201
1000
900
800
700
0.8pF
1.8pF
600
500
1
ꢀ00
300
2.2pF
3.3pF
200
100
4.7pF
6.8pF
0
500
1000
1500
2000
2500
3000
Frequency (MHz4
Typical SRF vs. Capacitance
®
Accu-P 0201
8
7
6
5
4
3
2
1
0
3
4
5
6
7
8
9
10
SRF (GHz)
Typical Q vs. Frequency
®
Accu-P 0201
1000
0.8pF
Q
100
1.8pF
3.9pF
ꢀ.7pF
6.8pF
10
500
1000
1500
2000
2500
3000
Frequency (MHz4
17
®
®
Accu-F / Accu-P
High Frequency Characteristics
Typical ESR vs. Frequency
Typical ESR vs. Frequency
® ®
®
Accu-P 0402
Accu-F /Accu-P 0603
1
0.25
1.0pF
0.2
2.2pF
2.7pF
10pF
0.15
0.1
1
4.7pF
0.1
10pF
22pF
0.05
0
0
500
1000
Frequency (MHz4
Measured on Boonton 3ꢀA
1500
2000
2500
0.01
0
0.5
Measured on Boonton 3ꢀ-A
(3ꢀ-A limits measurements to 3GHz4
1
1.5
2
2.5
3GHz
Typical Q vs. Frequency
Typical Q vs. Frequency
® ®
®
Accu-P 0402
Accu-F /Accu-P 0603
10000
1000
100
10
10000
1000
1 pF
2.2 pF
4.7 pF
100
10
10 pF
10pF
22pF
2.7pF
1
0
500
1000
1500
2000
2500
3000
0
0.5
Measured on Boonton 3ꢀ-A
(3ꢀ-A limits measurements to 3GHz4
1
1.5
2
2.5
3GHz
Frequency (MHz4
Typical Self Resonant Frequency vs. Capacitance
Typical Self Resonant Frequency vs. Capacitance
®
®
®
Accu-F /Accu-P 0603
Accu-P 0402
GHz
10
8
7
6
5
ꢀ
3
2
1
0
1
0
2
ꢀ
6
8
10
12
0.1
CAPACITANCE (pF4
1
10
100
pF
Measured on Wiltron 360 Vector Analyzer
L (self inductance)
0.78 nH
~
NOTE
L and SRF are obtained from the measured increase in
effective capacitance as the frequency is increased
Measured on the Boonton 34-A
18
®
®
Accu-F / Accu-P
High Frequency Characteristics
Typical ESR vs. Frequency
Accu-F /Accu-P 0805
Typical ESR vs. Frequency
®
®
®
Accu-P 1210
1
1
1pF
1pF
3.3pF
3.3pF
0.1
1
0.1
10pF
33pF
33pF
0.01
0.01
0
0.5
Measured on Boonton 3ꢀ-A
(3ꢀ-A limits measurements to 3GHz4
1
1.5
2
2.5
3GHz
0
0.5
Measured on Boonton 3ꢀ-A
(3ꢀ-A limits measurements to 3GHz4
1
1.5
2
2.5
3GHz
Typical Q vs. Frequency
Accu-F /Accu-P 0805
Typical Q vs. Frequency
®
®
®
Accu-P 1210
10000
1000
10000
1000
100
10
100
10
1pF
1pF
3.3pF
3.3pF
2.5
10pF
10pF
33pF
33pF
0
0.5
1
1.5
2
3GHz
0
0.5
1
1.5
2
2.5
3GHz
Measured on Boonton 3ꢀ-A
(3ꢀ-A limits measurements to 3GHz4
Measured on Boonton 3ꢀ-A
(3ꢀ-A limits measurements to 3GHz4
Typical Self Resonant Frequency vs. Capacitance
Typical Self Resonant Frequency vs. Capacitance
®
®
®
Accu-P 1210
Accu-F /Accu-P 0805
GHz
10
GHz
10
1
1
0.1
0.1
1
10
100
pF
1
10
100
pF
L (self inductance)
1.02 nH
~
L (self inductance)
NOTE
0.82 nH
~
NOTE
L and SRF are obtained from the measured increase in
L and SRF are obtained from the measured increase in
effective capacitance as the frequency is increased
effective capacitance as the frequency is increased
Measured on the Boonton 34-A
Measured on the Boonton 34-A
19
®
®
Accu-F / Accu-P
Environmental / Mechanical Characteristics
ENVIRONMENTAL CHARACTERISTICS
TEST
CONDITIONS
REQUIREMENT
Life (Endurance)
MIL-STD-202F Method 108A
125ꢀC, 2UR,1000 hours
No visible damage
∅C/C ≤ 2ꢁ for C≥5pF
∅C ≤ 0.25pF for C<5pF
Accelerated Damp
85ꢀC, 85ꢁ RH, UR, 1000 hours
No visible damage
Heat Steady State
MIL-STD-202F Method 103B
∅C/C ≤ 2ꢁ for C≥5pF
∅C ≤ 0.25pF for C<5pF
1
Temperature Cycling
MIL-STD-202F Method 107E
MIL-STD-883D Method 1010.7
-55ꢀC to +125ꢀC, 15 cycles – Accu-P®
-55ꢀC to +125ꢀC, 5 cycles – Accu-F®
No visible damage
∅C/C ≤ 2ꢁ for C≥5pF
∅C ≤ 0.25pF for C<5pF
Resistance to Solder Heat
IEC-68-2-58
260ꢀC 5ꢀC for 10 secs
C remains within initial limits
MECHANICAL CHARACTERISTICS
TEST
CONDITIONS
REQUIREMENT
Solderability
IEC-68-2-58
Components completely immersed in a
solder bath at 235ꢀC for 2 secs.
Terminations to be well tinned, minimum 95ꢁ
coverage
Leach Resistance
IEC-68-2-58
Components completely immersed in a
solder bath at 260 5ꢀC for 60 secs.
Dissolution of termination faces ≤15ꢁ of area
Dissolution of termination edges ≤25ꢁ of length
Adhesion
A force of 5N applied for 10 secs.
No visible damage
MIL-STD-202F Method 211A
Termination Bond Strength
IEC-68-2-21 Amend. 2
Tested as shown in diagram
No visible damage
∅C/C ≤ 2ꢁ for C≥5pF
∅C ≤ 0.25pF for C<5pF
D
D = 3mm Accu-P
D = 1mm Accu-F
ꢀ5mm
ꢀ5mm
Robustness of Termination
IEC-68-2-21 Amend. 2
A force of 5N applied for 10 secs.
55Hz to 2000Hz, 20G
No visible damage
No visible damage
High Frequency Vibration
MIL-STD-202F Method 201A,
®
204D (Accu-P only)
Storage
12 months minimum with components
stored in “as received” packaging
Good solderability
Average capacitance with histogram printout for
capacitance distribution;
QUALITY & RELIABILITY
Accu-P is based on well established thin-film technology
and materials.
®
IR and Breakdown Voltage distribution;
Temperature Coefficient;
Solderability;
• ON-LINE PROCESS CONTROL
Dimensional, mechanical and temperature stability.
This program forms an integral part of the production cycle
and acts as a feedback system to regulate and control
production processes. The test procedures, which are
integrated into the production process, were developed
after long research work and are based on the highly
developed semiconductor industry test procedures and
equipment. These measures help AVX to produce a con-
sistent and high yield line of products.
QUALITY ASSURANCE
The reliability of these thin-film chip capacitors has been
studied intensively for several years. Various measures
have been taken to obtain the high reliability required today
by the industry. Quality assurance policy is based on well
established international industry standards. The reliability
of the capacitors is determined by accelerated testing
under the following conditions:
• FINAL QUALITY INSPECTION
Life (Endurance)
Accelerated Damp
Heat Steady State
125ꢀC, 2UR, 1000 hours
Finished parts are tested for standard electrical parameters
and visual/mechanical characteristics. Each production lot
is 100ꢁ evaluated for: capacitance and proof voltage at
2.5 UR. In addition, production is periodically evaluated for:
85ꢀC, 85ꢁ RH, UR,
1000 hours.
20
®
®
Accu-F / Accu-P
Performance Characteristics RF Power Applications
ESR and therefore RF heating. Values of ESR for
RF POWER APPLICATIONS
In RF power applications capacitor losses generate heat. Two
factors of particular importance to designers are:
®
Accu-P capacitors are significantly less than those of
ceramic MLC components currently available.
• Minimizing the generation of heat.
• Dissipating heat as efficiently as possible.
HEAT DISSIPATION
• Heat is dissipated from a capacitor through a variety of
paths, but the key factor in the removal of heat is the
thermal conductivity of the capacitor material.
• The higher the thermal conductivity of the capacitor, the
more rapidly heat will be dissipated.
CAPACITOR HEATING
1
• The major source of heat generation in a capacitor in RF
power applications is a function of RF current (I) and ESR,
from the relationship:
• The table below illustrates the importance of thermal
®
2
conductivity to the performance of Accu-P in power
Power dissipation = I RMS x ESR
applications.
®
• Accu-P capacitors are specially designed to minimize
PRODUCT
MATERIAL
Alumina
Magnesium Titanate
THERMAL CONDUCTIVITY W/mK
®
Accu-P
Microwave MLC
18.9
6.0
Power Handling
®
Accu-P 10pF
Amps
8
6
4
Data used in calculating the graph:
Thermal impedance of capacitors:
0402
0603
0805
1210
17ꢀC/W
12ꢀC/W
6.5ꢀC/W
5ꢀC/W
1210
1210
0805
0805
0603
0ꢀ02
Thermal impedance measured using RF generator,
amplifier and strip-line transformer.
2
0
ESR of capacitors measured on Boonton 34A
0
200 400 600 800 1000 1200 1400MHz
The thermal impedance expresses the temperature difference
in ꢀC between chip center and termination caused by
a power dissipation of 1 watt in the chip. It is expressed in
ꢀC/W.
THERMAL IMPEDANCE
Thermal impedance of Accu-P chips is shown below com-
pared with the thermal impedance of Microwave MLC’s.
®
CAPACITOR TYPE
Accu-P®
CHIP SIZE
THERMAL IMPEDANCE (ꢀC/W)
0805
1210
6.5
5
Microwave MLC
0505
1210
12
7.5
ADVANTAGES OF ACCU-P®
IN RF POWER CIRCUITS
The optimized design of Accu-P offers the designer of RF
power circuits the following advantages:
PRACTICAL APPLICATION
IN RF POWER CIRCUITS
®
• There is a wide variety of different experimental methods
for measuring the power handling performance of a
capacitor in RF power circuits. Each method has its
own problems and few of them exactly reproduce the
conditions present in “real” circuit applications.
• Similarly, there is a very wide range of different circuit appli-
cations, all with their unique characteristics and operating
conditions which cannot possibly be covered by such
“theoretical” testing.
• Reduced power losses due to the inherently low ESR of
®
Accu-P .
• Increased power dissipation due to the high thermal
®
conductivity of Accu-P .
• THE ONLY TRUE TEST OF A CAPACITOR IN ANY PARTICULAR
APPLICATION IS ITS PERFORMANCE UNDER OPERATING
CONDITIONS IN THE ACTUAL CIRCUIT.
21
®
®
Accu-F / Accu-P
Application Notes
GENERAL
HANDLING
®
®
Accu-F and Accu-P SMD capacitors are designed for
soldering to printed circuit boards or other substrates. The
construction of the components is such that they will with-
stand the time/temperature profiles used in both wave and
reflow soldering methods.
SMD capacitors should be handled with care to avoid damage
or contamination from perspiration and skin oils. The use of
plastic tipped tweezers or vacuum pick-ups is strongly recom-
mended for individual components. Bulk handling should
ensure that abrasion and mechanical shock are minimized. For
automatic equipment, taped and reeled product gives the
ideal medium for direct presentation to the placement
machine.
1
CIRCUIT BOARD TYPE
COMPONENT PAD DESIGN
®
The circuit board types which may be used with Accu-F and
Component pads must be designed to achieve good
joints and minimize component movement during reflow
soldering. Pad designs are given below for both wave and
reflow soldering.
®
Accu-P are as follows:
®
Accu-F : All flexible types of circuit boards
(eg. FR-4, G-10).
®
The basis of these designs is:
Accu-P : All flexible types of circuit boards
(eg. FR-4, G-10) and also alumina.
a. Pad width equal to component width. It is permissible to
decrease this to as low as 85ꢁ of component width but
it is not advisable to go below this.
For other circuit board materials, please consult factory.
b. Pad overlap 0.5mm beneath large components. Pad
overlap about 0.3mm beneath small components.
c. Pad extension of 0.5mm for reflow of large components
and pad extension about 0.3mm for reflow of small com-
ponents. Pad extension about 1.0mm for wave soldering.
WAVE SOLDERING
DIMENSIONS: millimeters (inches)
1.5
(0.0594
1.5
(0.0594
5.0
(0.1974
0.8
(0.0314
0.26
1.2
(0.0ꢀ74
1.25
(0.0ꢀ94
ꢀ.0
(0.1574
(0.010)
2.0
(0.0794
0.40
1.0
(0.0394
(0.016)
2.1
(0.0834
0.5
(0.0204
1.06
(0.042)
3.1
(0.1224
3.1
(0.1224
0.6
(0.02ꢀ4
0.7
(0.0284
0.40
(0.016)
0.8
(0.0314
0.34
(0.013)
1.5
(0.0594
1.25
(0.0ꢀ94
1.2
(0.0ꢀ74
1.5
(0.0594
0.55
(0.0224
1.25
(0.0ꢀ94
0.8
(0.0314
0.8
(0.0314
2.5
(0.0984
0603
0805
1210
Accu-P®
0201
Accu-P®
0402
Accu-P®
0603
Accu-F®
Accu-P®
Accu-F®
Accu-P®
REFLOW SOLDERING
DIMENSIONS: millimeters (inches)
1.0
(0.0394
1.0
ꢀ.0
(0.1574
0.26
(0.010)
0.8
0.85
(0.0394
(0.0314
(0.0334
0.26
(0.010)
2.0
(0.0794
0.6
3.0
(0.02ꢀ4
2.3
(0.0914
2.3
(0.0914
0.6
(0.02ꢀ4
(0.1184
0.7
(0.0284
1.7
(0.0684
1.0
(0.0394
0.78
(0.030)
0.5
(0.0204
0.85
(0.0334
0.8
(0.0314
0.6
(0.02ꢀ4
0.34
(0.013)
0.26
(0.010)
1.0
(0.0394
1.0
(0.0394
0.8
(0.0314
0.8
(0.0314
0.55
(0.0224
1.25
(0.0ꢀ94
2.5
(0.0984
0603
0805
1210
Accu-P®
0201
Accu-P®
0402
Accu-P®
0603
Accu-P®
Accu-F®
Accu-P®
Accu-F®
22
®
®
Accu-F / Accu-P
Application Notes
PREHEAT & SOLDERING
CLEANING RECOMMENDATIONS
The rate of preheat in production should not exceed 4ꢀC/
second and a recommended maximum is about 2ꢀC/second.
Temperature differential from preheat to soldering should not
exceed 100ꢀC.
For further specific application or process advice, please consult
AVX.
Care should be taken to ensure that the devices are
thoroughly cleaned of flux residues, especially the space
beneath the device. Such residues may otherwise become
conductive and effectively offer a lossy bypass to the device.
Various recommended cleaning conditions (which must be
optimized for the flux system being used) are as follows:
Cleaning liquids. . . . . . . i-propanol, ethanol, acetylacetone,
water and other standard PCB
1
COOLING
cleaning liquids.
After soldering, the assembly should preferably be allowed
to cool naturally. In the event of assisted cooling, similar
conditions to those recommended for preheating should be
used.
Ultrasonic conditions . . power-20w/liter max.
frequency-20kHz to 45kHz.
Temperature . . . . . . . . . 80ꢀC maximum (if not otherwise
limited by chosen solvent system).
Time . . . . . . . . . . . . . . . 5 minutes max.
HAND SOLDERING & REWORK
Hand soldering is permissible. Preheat of the PCB to 150ꢀC is
required. The most preferable technique is to use hot air sol-
dering tools. Where a soldering iron is used, a temperature
controlled model not exceeding 30 watts should be used and
set to not more than 260ꢀC.
STORAGE CONDITIONS
®
Recommended storage conditions for Accu-F and
®
Accu-P prior to use are as follows:
Temperature . . . . . . . . . . 15ꢀC to 35ꢀC
Humidity . . . . . . . . . . . . . ≤65ꢁ
Air Pressure . . . . . . . . . . 860mbar to 1060mbar
RECOMMENDED SOLDERING
PROFILE
IR REFLOW
WAVE SOLDERING
3–5 seconds
220
260
2ꢀ0
220
200
180
160
1ꢀ0
120
100
80
60
ꢀ0
Assembly exits heat–
210
200
190
180
170
160
150
1ꢀ0
130
120
110
100
90
no forced cooldown
100°C
Additional soak time
to allow uniform
heating of the
substrate
Natural
Cooling
186°C solder melting
temperature
Assembly enters the
preheat zone
ꢀ5-60 sec.
above solder
melting point
Enter Wave
Time (seconds4
Soak time
20
80
14 Activates the flux
24 Allows center of board
temperatures to catch up with
corners
70
0
10
20
30
ꢀ0
50
60
70
80
90 100 110 120
60
50
ꢀ0
30
20
0
0.5
1
1.5
2
2.5
3
3.5
ꢀ
ꢀ.5
Time (mins4
VAPOR PHASE
Transfer from
preheat with
min. delay &
temp. loss
Preheat
Reflow
215°C
215°C
200
180
160
1ꢀ0
120
100
80
200
180
160
1ꢀ0
120
100
80
Duration varies
Natural
Cooling
with thermal mass
of assembly
10–60 secs typical
Enter
Vapor
60
60
ꢀ0
ꢀ0
20
20
0
0
10
20
30
40
50
60
70
Time (minutes4
Time (seconds4
23
®
®
Accu-F /Accu-P
Automatic Insertion Packaging
TAPE & REEL
All tape and reel specifications are in compliance with EIA 481-1-A.
(equivalent to IEC 286 part 3).
• 8mm carrier
• Reeled quantities: Reels of 3,000 per 7" reel or 10,000 pieces per 13" reel
0201 and 0402 = 5,000 pieces per 7" reel and 20,000 pieces per 13" reel
1
REEL
DIMENSIONS: millimeters (inches)
(1)
A
B
C
D
E
F
G
180 1.0
(7.087 0.039)
1.5 min.
(0.059 min.)
13 0.2
(0.512 0.008)
20.2 min.
(0.795 min.)
50 min.
(1.969 min.)
9.6 1.5
(0.370 0.050)
14.4 max.
(0.567 max.)
Metric dimensions will govern.
Inch measurements rounded and for reference only.
(14 330mm (13 inch4 reels are available.
G MAX.
B*
C
A
E
F
D*
FULL RADIUS
*DRIVE SPOKES OPTIONAL
IF USED, ASTERISKED
DIMENSIONS APPLY.
CARRIER
DIMENSIONS: millimeters (inches)
A
B
C
D
E
F
+0.1
8.0 0.3
(0.315 0.012)
3.5 0.05
(0.138 0.002)
1.75 0.1
(0.069 0.004)
2.0 0.05
(0.079 0.002)
4.0 0.1
(0.157 0.004)
1.5-0.0
(0.059-0.000)
+0.00ꢀ
NOTE: The nominal dimensions of the component compartment (W,L4 are derived from the component size.
10 PITCHES
CUMULATIVE
E
TOLERANCE ON
TAPE 0.2
D
F
C
TOP
TAPE
W
B
A
L
P = 4mm except 0201 and 0402 where P = 2mm
P
CENTER LINES
OF CAVITY
DIRECTION OF FEED
NOTE: AVX reserves the right to change the information published herein without notice.
2ꢀ
相关型号:
©2020 ICPDF网 联系我们和版权申明